跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的3指南

英语
中文

正翻译步骤 6

步骤 6
Remove the two 3.1 mm Phillips screws securing the iSight holder to the top of the display.
  • Remove the two 3.1 mm Phillips screws securing the iSight holder to the top of the display.

  • Make sure to remove the screws securing the metal bracket to the edge of the display and not the screws in the iSight board itself.

  • If you are replacing your screen with a new one, your part may not have these two screw holes. That's OK. You can still reassemble your computer without those screws in place.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可