跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的3指南

英语
中文

正翻译步骤 2

步骤 2
Remove the four 3mm screws with a #0 Phillips screwdriver. Remove the one 4mm screw located at the edge of the auto-away sensor. Use a #0 Phillips screwdriver.
Remove screws
  • Remove the four 3mm screws with a #0 Phillips screwdriver.

  • Remove the one 4mm screw located at the edge of the auto-away sensor. Use a #0 Phillips screwdriver.

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可