跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的5指南

英语
德语

正翻译步骤 3

步骤 3
Using a T5 Torx screwdriver head, take out the 14 screws (3.5 mm diameter and 5 mm long) that hold the back plate in place. Make sure to keep all of the screws together, as they are very easily lost. The magnetic project mat or a container is a great way to keep all the little metal screws as well as other small metal pieces from being lost.
Removing the Back Plate
  • Using a T5 Torx screwdriver head, take out the 14 screws (3.5 mm diameter and 5 mm long) that hold the back plate in place.

  • Make sure to keep all of the screws together, as they are very easily lost.

  • The magnetic project mat or a container is a great way to keep all the little metal screws as well as other small metal pieces from being lost.

Mit einem Torx T5 Schrauber kannst du die 14 Schrauben (3,5mm x 5mm) entfernen.

Achte gut auf die Schrauben, nicht verlieren!

Mit einer Magnetmatte kann man die Schrauben gut festhalten, genauso viele andere kleine Metallteile.

在开源创作共享许可协议下,你的投稿已被许可