跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的2本指南

英语
中文

正翻译步骤 7

步骤 7
Pry up the front panel along the right edge using the method described in previous steps. Eventually work around the entire perimeter of the front panel until it is lifted slightly from the inner case. Don't try to completely remove the front panel just yet. Its ribbon cable is still attached to the inner case.
  • Pry up the front panel along the right edge using the method described in previous steps.

  • Eventually work around the entire perimeter of the front panel until it is lifted slightly from the inner case.

  • Don't try to completely remove the front panel just yet. Its ribbon cable is still attached to the inner case.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可