注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南。
正翻译步骤 2
步骤 2

-
Use your heat gun to soften the adhesive under the LCD panel along its left edge.
注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南。
In the following steps, you will use a heat gun to soften the adhesive securing the underside of the LCD panel to the inner case. The area the adhesive is applied to is shown in red in the second picture (with the LCD removed).
Use your heat gun to soften the adhesive under the LCD panel along its left edge.
下一行
上一行
在下面插入新的一行
在上面插入新的一行
缩进当前行
取消缩进当前行
删除当前行
导航到下一步。
导航到上一步。
打开帮助