跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的2指南

英语
中文

正翻译步骤 1

步骤 1
After the battery has been removed, use the spudger to disconnect the remaining ribbons. Notice that there are two side ribbons, one on each side (volume up/down and power), and a top ribbon as well as those from the battery compartment. Notice that there are two side ribbons, one on each side (volume up/down and power), and a top ribbon as well as those from the battery compartment.
Removal of Ribbons
  • After the battery has been removed, use the spudger to disconnect the remaining ribbons.

  • Notice that there are two side ribbons, one on each side (volume up/down and power), and a top ribbon as well as those from the battery compartment.

在移开电池后,使用撬棒来移除剩下的排线。

请注意,有两个侧面排线,一个在音量上下和电源键附近 另一个在左侧电池仓位置。

[title] Removal of Ribbons
[* black] After the battery has been removed, use the spudger to disconnect the remaining ribbons.
[* red] Notice that there are two side ribbons, one on each side (volume up/down and power), and a top ribbon as well as those formfrom the battery compartment.
[* red] Notice that there are two side ribbons, one on each side (volume up/down and power), and a top ribbon as well as those formfrom the battery compartment.

在开源创作共享许可协议下,你的投稿已被许可