跳转到主内容

修复你的物品

维修的权力

配件 & 工具

英语
中文

正翻译步骤 12

步骤 12
没有图片
Closing it up
  • Once you're satisfied your keyboard is now fully working, turn it off, re-install the thin metal plate and use superglue to replace the welds and hold it down. Apply firm pressure so there are no gaps.

  • This will take a while, but it's worth doing properly because those welds were important! They stopped the entire keyboard from popping out when you press on a key. The superglue will suffice and with the added benefit of being easily removed if you need to re-enter the keyboard.

  • If the adhesive on the back of the plate is still in fairly good condition, you should be able to stick the white plastic cover back on. If not, use a little glue.

  • You can now re-install the grey plastic cover and every single key on the keyboard. To do this, apply pressure between two fingers to clip the keys back on, one on the underside. This will stop the glue from breaking.

  • That's it! Test it again to make sure it works. If it does you're clear to start using it again. Just be mindful that the structure has been compromised. Smashing your fists on the keys at any time will undo your work gluing it back together.

一旦你修复的键盘完全恢复正常工作,关闭它,重新安装薄金属板,并使用超级胶水取代焊接,粘接的时候按住铝箔板,施加一些压力,确保没有间隙。

粘接组装需要一段时间,但这是值得做的重要的步骤。因为原键盘的这些焊接,当你按下一个键时,他们阻止了整个键盘弹出。我们重新组装用胶水就足够了,如果你需要重新拆开键盘的话,它还有一个额外的好处,就是可以很容易地移除。

如果金属板版背面的胶黏剂仍处于相当好的状态,您应该能够将白色塑料盖重新粘上。如果没有,用一点胶水。

现在您可以重新安装灰色塑料盖和键盘上的每一个键。要执行此操作,请在两个手指之间施加压力,将键帽重新卡入,其中一个卡位在底部。这将阻止胶水断裂。

就这样!再测试一次以确保它有效。如果是的话,你可以再次使用它。只是要注意结构已经被破坏了。在任何时候把拳头砸在键盘上都会使你把键盘粘在一起的工作付之东流。

在开源创作共享许可协议下,你的投稿已被许可