跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的18本指南

英语
中文

正翻译步骤 2

步骤 2
Remove the following four screws securing the power supply to the rear case (size T8 or T10 depending on the exact model):
  • Remove the following four screws securing the power supply to the rear case (size T8 or T10 depending on the exact model):

  • Two 23.7 mm Torx screws

  • Two 7.3 mm Torx screws

卸下下列将电源与背壳固定的4个螺丝。

2个23.7 mm T10 螺丝

2个 7.3 mm T10 螺丝

[* black] Remove the following four screws securing the power supply to the rear case:
[*
case (size T8 or T10 depending on the exact model):
[*
red] Two 23.7 mm T10 screws.Torx screws
[* orange] Two 7.3 mm T10 screws.Torx screws
[* black] Remove the following four screws securing the power supply to the rear case:
[*
case (size T8 or T10 depending on the exact model):
[*
red] Two 23.7 mm T10 screws.Torx screws
[* orange] Two 7.3 mm T10 screws.Torx screws

在开源创作共享许可协议下,你的投稿已被许可