跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的5本指南

英语
中文

正翻译步骤 1

步骤 1
Follow the remaining steps if you are replacing your hard drive with an SSD kit. If your SSD enclosure looks like the first image, follow this guide instead. Line up the SSD connectors with the metal enclosure's sockets.
Replace the hard drive with an SSD
  • Follow the remaining steps if you are replacing your hard drive with an SSD kit.

  • If your SSD enclosure looks like the first image, follow this guide instead.

  • Line up the SSD connectors with the metal enclosure's sockets.

  • Press the drive against the enclosure sockets until the SSD is firmly seated.

  • The SSD connects with the enclosure in only one direction. If the connectors don't line up, rotate the SSD and try again.

如果要用SSD硬盘架更换硬盘驱动器,请执行其余步骤。

如果您的SSD硬盘架看起来像第一个图片,请按照本指南操作。

将SSD接口与硬盘架金属插槽对齐。

将硬盘插在硬盘架插槽上,直到SSD牢固就位。

SSD仅在一个方向与硬盘架接口连接。如果连接器未对齐,请翻转SSD并重试。

在开源创作共享许可协议下,你的投稿已被许可