跳转到主内容

修复你的物品

维修的权力

配件 & 工具

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的20指南

英语
西班牙语

正翻译步骤 2

步骤 2
Use the flat end of a spudger to disconnect the left fan connector from the logic board. It is useful to twist the spudger axially from beneath the fan cable wires to release the connector. The fan socket and the fan connector can be seen in the second and third pictures. Be careful not to break the plastic fan socket off the logic board as you use your spudger to lift the fan connector straight up and out of its socket. The layout of the logic board shown in the second picture may look slightly different than your machine but the fan socket is the same.
  • Use the flat end of a spudger to disconnect the left fan connector from the logic board.

  • It is useful to twist the spudger axially from beneath the fan cable wires to release the connector.

  • The fan socket and the fan connector can be seen in the second and third pictures. Be careful not to break the plastic fan socket off the logic board as you use your spudger to lift the fan connector straight up and out of its socket. The layout of the logic board shown in the second picture may look slightly different than your machine but the fan socket is the same.

Utiliza la parte plana del spudger para desconectar el conector de ventilador izquierdo de la tarjeta lógica

Facilitará tu trabajo el girar el spudger axialmente desde abajo de los cables del ventilador para liberar el conector (este conector es de presión vertical, no de enchufe tipo toma corriente).

El zócalo y conector del ventilador pueden verse en la 2º y 3º imagen. TEN cuidado de no romper el zócalo plástico del ventilador en la tarjeta lógica mientras utilizas el spudger para levantar rectamente y hacia afuera el conector del ventilador. El zócalo es igual aunque en la segunda foto difiera la placa electrónica.

在开源创作共享许可协议下,你的投稿已被许可