跳转到主内容

修复你的物品

维修的权力

商店

英语
中文

正翻译步骤 1

步骤 1
The screen remains.
  • The screen remains.

  • Compare your new replacement part to the original part. You may need to transfer remaining components (such as the two rubber grommets at the bottom of the screen) before installing.

  • The Touch ID function will ONLY work with your phone's original home button assembly, so you'll need to transfer the home button assembly from your old screen to your new screen to retain Touch ID.

  • Your replacement part may come with an extra Phillips screw already installed left of the Home Button. Remove the unnecessary screw so that you can reinstall the home button bracket.

  • After reassembly, clean the touchscreen surface with an alcohol wipe prior to turning the iPhone back on. The alcohol helps dissipate any lingering static electricity, which can cause problems with the display.

  • After reassembly, connect the iPhone to an AC power source before turning it on for the first time. Once the iPhone has booted up successfully, you can disconnect the AC power.

剩下的屏幕组件

Touch ID只能与你原来手机上的home键一起工作,所以你需要把你的home键从你原来的屏幕组件组装到新的屏幕组件上面,这样才能继续使用Touch ID。

您的更换部件可能已经安装了Home按钮左侧的额外Phillips螺丝。 卸下不必要的螺钉,以便重新安装主页按钮支架。

在组装按键后,将其安装回iPhone上之前,用酒精清洁触摸屏表面。酒精可以消除可能会影响显示屏的静电。

组装完成后,在启动iPhone前,把它连接上充电线。一旦iPhone成功启动,就可以断开充电线了。

[* black] The screen remains.
[* black] Compare your new replacement part to the original part. You may need to transfer remaining components (such as the two rubber grommets at the bottom of the screen) before installing.
[* icon_reminder] The Touch ID function will '''ONLY''' work with your phone's original home button assembly, so you'll need to transfer the home button assembly from your old screen to your new screen to retain Touch ID.
[* icon_reminder] Your replacement part may come with an [https://d3nevzfk7ii3be.cloudfront.net/igi/gXF4ssVeJA5Ox42x|extra Phillips screw|new_window=true] already installed left of the Home Button. Remove the unnecessary screw so that you can reinstall the home button bracket.
[* icon_note] After reassembly, clean the touchscreen surface with an alcohol wipe prior to turning the iPhone back on. The alcohol helps dissipate any lingering static electricity, which can cause problems with the display.
[* icon_caution] After reassembly, connect the iPhone to an AC power source before turning it on for the first time. Once the iPhone has booted up successfully, you can disconnect the AC power.

在开源创作共享许可协议下,你的投稿已被许可