修复你的物品

维修的权力

商店

注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的18本指南。

返回指南
英语
中文
上一步 下一步

正翻译步骤 14

步骤 14
Finally, disconnect the digitizer cable connector. When reconnecting the digitizer cable, do not press the center of the connector. Press one end of the connector, then press the opposite end. Pressing in the center of the connector can bend the component and cause digitizer damage.

  • Finally, disconnect the digitizer cable connector.

  • When reconnecting the digitizer cable, do not press the center of the connector. Press one end of the connector, then press the opposite end. Pressing in the center of the connector can bend the component and cause digitizer damage.

用撬棒的平头断开触摸层排线接头。

当你要组装触摸层排线时, 请不要按压接头的中间地方。按压接头的一端, 接着再按压另一端。因为若是按压接头中间时, 有可能造成触摸层变形损坏。

[* black] Finally, use a plastic opening tool to disconnect the digitizer cable connector.
[* black] Finally, use a plastic opening tool to disconnect the digitizer cable connector.
[* icon_reminder] When reconnecting the digitizer cable, '''do not press the center of the connector'''. Press one end of the connector, then press the opposite end. Pressing in the center of the connector can bend the component and cause digitizer damage.

在开源创作共享许可协议下，你的投稿已被许可。