跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
中文

正翻译步骤 2

步骤 2
Use a spudger tool to release the black clips on the two connectors holding the flat, yellow cable in place. Use the tweezers to pull the flat, yellow cable out of its connectors.
Remove yellow cables
  • Use a spudger tool to release the black clips on the two connectors holding the flat, yellow cable in place.

  • Use the tweezers to pull the flat, yellow cable out of its connectors.

  • Use the tweezers to disconnect the battery connector from the circuit board.

  • Using the spudger tool again, pry up and release the connectors at the ends of the flat, orange cable.

  • Remove the flat, orange cable.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可