跳转到主内容
英语
中文

正翻译步骤 2

步骤 2
To remove the logic board from the body, use the #00 phillips head screwdriver and remove the 4mm silver screw from right side of the board. Next, rotate the camcorder so the front is facing you and remove the 4mm silver screw from the front panel. Carefully lift the logic board away from the camcorder.
  • To remove the logic board from the body, use the #00 phillips head screwdriver and remove the 4mm silver screw from right side of the board.

  • Next, rotate the camcorder so the front is facing you and remove the 4mm silver screw from the front panel.

  • Carefully lift the logic board away from the camcorder.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可