跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的7本指南

英语
中文

正翻译步骤 1

步骤 1
Insert the flat end of a spudger between the thin rubber strip surrounding the front display bezel and the rear display bezel. Do not try to insert the spudger between the thin rubber strip and the plastic face of the front display bezel. Use the flat end of your spudger to carefully pry the front display bezel away from the adhesive securing it to the rear display bezel.
  • Insert the flat end of a spudger between the thin rubber strip surrounding the front display bezel and the rear display bezel.

  • Do not try to insert the spudger between the thin rubber strip and the plastic face of the front display bezel.

  • Use the flat end of your spudger to carefully pry the front display bezel away from the adhesive securing it to the rear display bezel.

  • Do not pry against the fragile glass LCD panel. Also, do not excessively bend the plastic as it may permanently deform.

  • Continue prying until the front display bezel is free along the right side of the display and behind the right clutch hinge.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可