Skip to main content

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的2本指南

英语
中文

正翻译步骤 1

Step 1
Remove the following Phillips screws securing the upper component bracket:
  • Remove the following Phillips screws securing the upper component bracket:

  • One 1.5 mm screw

  • Two 2.3 mm screws

松开盖板上方的固定螺丝:

1颗1.5mm飞利浦#00螺丝

2颗2.3mm飞利浦#00螺丝

[* black] Remove the following Phillips screws securing the upper component bracket:
[* red] One 1.5 mm Phillips #00 screw
[* orange] Two 2.3 mm Phillips #00 screws
[* black] Remove the following Phillips screws securing the upper component bracket:
[* red] One 1.5 mm Phillips #00 screw
[* orange] Two 2.3 mm Phillips #00 screws

在开源创作共享许可协议下,你的投稿已被许可