跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的18本指南

英语
中文

正翻译步骤 11

Step 11
In the next four steps, take care to pry up only on the cable connectors, and not on their sockets on the logic board. While still supporting the front panel, use a fingernail or the edge of an opening tool to disconnect the front-facing camera and earpiece speaker connector.
  • In the next four steps, take care to pry up only on the cable connectors, and not on their sockets on the logic board.

  • While still supporting the front panel, use a fingernail or the edge of an opening tool to disconnect the front-facing camera and earpiece speaker connector.

在接下来的四个步骤中,使用撬棒时注意只撬排线接口,而不是接口插座。

使用撬棒的平头断开前摄像头和传感器排线接口。

[* icon_caution] In the next four steps, take care to pry up '''only''' on the cable connectors, and not on their sockets on the logic board.
[* black] While still supporting the front panel, use a plasticfingernail or the edge of an opening tool to disconnect the front-facing camera and earpiece speaker cable connector.
[* black] While still supporting the front panel, use a plasticfingernail or the edge of an opening tool to disconnect the front-facing camera and earpiece speaker cable connector.

在开源创作共享许可协议下,你的投稿已被许可