跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的2指南

英语
中文

正翻译步骤 5

步骤 5
The rubber gasket surrounding the home button is very thin and tears easily. Apply mild heat (with an iOpener, heat gun, or hair dryer) to soften the adhesive securing the home button gasket.
  • The rubber gasket surrounding the home button is very thin and tears easily.

  • Apply mild heat (with an iOpener, heat gun, or hair dryer) to soften the adhesive securing the home button gasket.

  • Using your fingertip, gently press up on the home button from the front side of the display assembly. Use firm, constant pressure to slowly separate the home button's rubber gasket from the front panel.

在Home键的反面用手指轻轻推动不要滑动使得Home键橡胶垫圈一边从前置面板上分离出来。

不要整个Home键推开,推开一角就即以,然后用撬棒把Home键撬起即可。

Home键周围的橡胶垫是很薄的。为了避免橡胶垫被撕拉,我们推荐稍微加热一下。

[* icon_caution] The rubber gasket surrounding the home button is very thin and tears easily.
[* black] Apply mild heat (with an [product|IF145-198-2|iOpener], heat gun, or hair dryer) to soften the adhesive securing the home button gasket.
[*
black] Using your fingertip, gently push, but do '''not''' remove,press up on the home button up from the oppositefront side to free one edge of the display assembly. Use firm, constant pressure to slowly separate the home buttonbutton's rubber gasket from the front panel.
[* icon_caution] Do '''not''' push the home button all the way through—you only need to get a corner free, so that you can pry it free with a spudger.
[* icon_note] The rubber gasket surrounding the home button is very thin. To prevent the gasket from tearing, we recommend applying a minimal amount of heat.
[* icon_caution] The rubber gasket surrounding the home button is very thin and tears easily.
[* black] Apply mild heat (with an [product|IF145-198-2|iOpener], heat gun, or hair dryer) to soften the adhesive securing the home button gasket.
[*
black] Using your fingertip, gently push, but do '''not''' remove,press up on the home button up from the oppositefront side to free one edge of the display assembly. Use firm, constant pressure to slowly separate the home buttonbutton's rubber gasket from the front panel.
[* icon_caution] Do '''not''' push the home button all the way through—you only need to get a corner free, so that you can pry it free with a spudger.
[* icon_note] The rubber gasket surrounding the home button is very thin. To prevent the gasket from tearing, we recommend applying a minimal amount of heat.

在开源创作共享许可协议下,你的投稿已被许可