跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的18本指南

英语
中文

正翻译步骤 2

步骤 2
While holding the iPhone down with one hand, pull up on the suction cup to slightly separate the front panel assembly from the rear case.
  • While holding the iPhone down with one hand, pull up on the suction cup to slightly separate the front panel assembly from the rear case.

  • Take your time and apply firm, constant force. The display assembly is a much tighter fit than most devices.

  • Using a plastic opening tool, begin to gently pry the rear case down, away from the display assembly, while continuing to pull up with the suction cup.

  • There are several clips attaching the front panel assembly to the rear case, so you may need to use a combination of the suction cup and plastic opening tool to free the front panel assembly.

一只手把 iPhone 按下的同时,把吸盘轻轻地往上拉,使前面板组件和后机壳分离。

慢慢来,使用恒定的力量。显示屏组件比大多数的设备都要紧。

使用塑料撬棒,开始轻轻地把后机壳撬下来,在这个过程中继续拉吸盘。

前面板组件和后机壳有几个夹扣连接,所以你需要使用吸盘和撬棒工具组合。

在开源创作共享许可协议下,你的投稿已被许可