跳转到主内容

iPhone 6 Plus 前面板组件更换

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的18指南

英语
中文

正翻译步骤 8

步骤 8
iPhone 6 Plus Front Panel Assembly Replacement: 步骤 0 中的图像 1,1
  • Use a clean fingernail or the edge of an opening tool to gently pry the battery connector up from its socket on the logic board.

  • Take care to only pry up on the battery connector, and not the socket on the logic board. If you pry up on the logic board socket, you may break the connector entirely.

用塑料撬棍从主板上撬下电池排线的接头。

注意只在排线接口上用力,不要伤到主板上的接口插座。如果你撬到了接口插座,你可能会直接把接口弄坏。

-[* black] Use a plastic opening tool to gently pry the battery connector up from its socket on the logic board.
+[* black] Use a clean fingernail or the edge of an opening tool to gently pry the battery connector up from its socket on the logic board.
[* icon_caution] Take care to ***only*** pry up on the battery connector, and not the socket on the logic board. If you pry up on the logic board socket, you may break the connector entirely.

您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)著作权利