跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的2指南

英语
中文

正翻译步骤 5

步骤 5
Flip the iPhone back over and thread a piece of dental floss or strong string behind the battery. Then, slowly pull back and forth in a sawing motion to separate the adhesive. A stronger alternative to floss is an unwound guitar string, such as a 0.009 E string from a 12-string set.
  • Flip the iPhone back over and thread a piece of dental floss or strong string behind the battery. Then, slowly pull back and forth in a sawing motion to separate the adhesive.

  • A stronger alternative to floss is an unwound guitar string, such as a 0.009 E string from a 12-string set.

  • Alternatively, insert a plastic card between the case side of the battery and the rear case.

  • Do not insert your card in the area between the volume down (-) button and the top edge of the battery, or you may damage the volume control cable lying underneath.

  • Do not pry against the logic board or you may damage the phone.

  • Keep the card as flat as possible to avoid bending the battery, which may damage it and cause it to release dangerous chemicals or catch fire. Do not use any sharp tools to pry at the battery.

  • Press the card in farther to break up the adhesive behind the battery.

从电池左侧向电池和机壳中间插入一张塑料卡片(废弃的银行卡等即可)。

或者可以使用未使用过的吉他弦来把电池搞出来,比如12弦套装中的0.009 E 那条弦。

或者在机身和电池之间插入一个塑料卡。

不要在音量减键与电池上方边缘之间的空隙插入你的卡片,否则可能会损伤下面的音量控制线缆

不要从电池靠近主板的一侧插入塑料卡片,否则可能会损伤手机。

尽量让塑料卡片与机身平行,避免电池被弯折。弯折电池可能会导致电池损坏并发生危险的化学反应。请勿使用尖锐工具撬动电池。

继续向里推入塑料卡片,以分离电池后面的粘合剂。

在开源创作共享许可协议下,你的投稿已被许可