跳转到主内容
英语
中文

正翻译步骤 5

步骤 5
Disconnect the Bluetooth cable by pulling the male end straight away from its socket. Use the flat end of a spudger to carefully pry the AirPort antenna off its socket on the AirPort card.
  • Disconnect the Bluetooth cable by pulling the male end straight away from its socket.

  • Use the flat end of a spudger to carefully pry the AirPort antenna off its socket on the AirPort card.

  • Pull the connector parallel to the face of the logic board, not straight up.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可