翻译步骤＃1 - iPad 2 CDMA Camera Bracket Replacement

注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的9本指南。

英语

中文

下一步

正翻译步骤 1

步骤 1

The camera bracket is attached to the front panel by adhesive. The use of an iOpener to soften the adhesive is highly recommended.
Follow the iOpener heating instructions described in the iOpener heating section at the beginning of this guide.
Be careful not to overheat the iOpener during the repair procedure. We recommend waiting at least two minutes before reheating the iOpener.
Place the iOpener over the front facing camera on the front edge of the top of the display.

在开源创作共享许可协议下，你的投稿已被许可。