翻译步骤＃13 - Removing iPad 3 4G Front Panel

注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的153本指南。

英语

中文

正翻译步骤 13

步骤 13

This step requires you to move the opening pick along the bottom right edge of the front panel. The Wi-Fi antenna is very close to the corner and is easily severed if the adhesive is released improperly.
Do not completely remove the pick from under the front glass, but pull it out just a little bit so that ~1/8" (3 mm) of the tip is still under the front glass.
Slide the tip of the opening pick along the bottom edge of the iPad, releasing the adhesive over the Wi-Fi antenna.

在开源创作共享许可协议下，你的投稿已被许可。