跳转到主内容
英语
中文

正翻译步骤 4

步骤 4
Use the tip of a spudger to walk the power button connector out of its socket on the logic board. It is recommended to first push on one side, then the other. Be very careful not to touch any solder joints on the back of the power supply. The power supply's capacitors may be charged enough to give you a dangerous shock.
  • Use the tip of a spudger to walk the power button connector out of its socket on the logic board.

  • It is recommended to first push on one side, then the other.

  • Be very careful not to touch any solder joints on the back of the power supply. The power supply's capacitors may be charged enough to give you a dangerous shock.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可