跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的10指南

英语
中文

正翻译步骤 3

步骤 3
Do not attempt to fully remove the LCD. It is still connected to the iPad by several cables at the home button end. Lift only from the front-facing camera end. Use the flat end of a spudger to pry the LCD out of its recess just enough to grab it with your fingers. Flip the iPad LCD like a page in a book, lifting near the camera and turning it over the home button end of the rear case.
  • Do not attempt to fully remove the LCD. It is still connected to the iPad by several cables at the home button end. Lift only from the front-facing camera end.

  • Use the flat end of a spudger to pry the LCD out of its recess just enough to grab it with your fingers.

  • Flip the iPad LCD like a page in a book, lifting near the camera and turning it over the home button end of the rear case.

  • Be gentle and keep an eye on the LCD cables as you flip the display over.

  • Lay the LCD on its face to allow access to the display cables.

  • Set the LCD down on a soft, clean, lint-free surface.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可