跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的8本指南

英语
中文

正翻译步骤 1

步骤 1
In the following steps, you will be placing the remaining pieces of adhesive on the front panel. Do not peel the clear backing off the strips just yet. Place the bridge shaped adhesive strip between the top edge of the inner frame of the front panel and the camera mounting bracket.
  • In the following steps, you will be placing the remaining pieces of adhesive on the front panel.

  • Do not peel the clear backing off the strips just yet.

  • Place the bridge shaped adhesive strip between the top edge of the inner frame of the front panel and the camera mounting bracket.

  • Smooth the strip down from the center out, taking care to not trap any air bubbles between the strip and the front panel.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可