跳转到主内容

修复你的物品

维修的权力

配件 & 工具

英语
中文

正翻译步骤 1

步骤 1
The LCD temperature sensor is located on the rear of the display panel in the top right corner when viewed from the rear.  It is under the black foil about 40mm (1 1/2 in) from the top edge of the panel. Lay the display panel face down on a cleared surface ensuring nothing is under the panel that may damage it.
  • The LCD temperature sensor is located on the rear of the display panel in the top right corner when viewed from the rear. It is under the black foil about 40mm (1 1/2 in) from the top edge of the panel.

  • Lay the display panel face down on a cleared surface ensuring nothing is under the panel that may damage it.

  • Carefully cut a small nic in the foil at the top right corner and gently peel back at an angle to expose the sensor. It will have a foam pad stuck over it.

  • Gently peel the foam off the sensor to reveal the PCB assembly.

  • The Sensor is held in place with a small adhesive pad so to remove it, gently pry it up from one edge with a plastic spudger or similar. I recommend NOT using metal tools here.

  • Disconnect the cable to remove the sensor

  • Quality Tip When installing the sensor, ensure the connector is well seated and you don't put the connector or cable under tension as this may cause them to separate after reassembly of the system

LCD温度传感器位于显示面板的后面,从后方观察右上角。 它位于黑色箔片的下方,距离面板的顶部边缘约为40mm(1 1/2 in)。

将显示面板朝下放置在干净的表面上,确保面板下方没有任何可能损坏的面板。

仔细切割右上角的箔片上的一小块,并以一定角度轻轻地剥离,露出传感器。 它会有一个泡沫垫粘在它上面。

将泡沫从传感器上轻轻地剥下,露出PCB组件。

传感器用一个小的粘合垫保持在适当的位置,以便将其从一个边缘轻轻地用塑料撬棒或类似物撬起。 我建议不要在这里使用金属工具。

断开电缆以拆下传感器

质量提示安装传感器时,请确保连接器安装牢靠,并且不要将连接器或电缆拉紧,否则可能导致系统重新组装后会分离

在开源创作共享许可协议下,你的投稿已被许可