Skip to main content

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的24指南

英语
中文

正翻译步骤 8

Step 8
Be very careful not to touch the capacitor leads or any exposed solder joints on the back of the power supply. Only handle the board by the edges. Flip the power supply over to access the DC power cable connection behind the logic board.
  • Be very careful not to touch the capacitor leads or any exposed solder joints on the back of the power supply. Only handle the board by the edges.

  • Flip the power supply over to access the DC power cable connection behind the logic board.

  • Squeeze the tab on the back side of the DC power cable connector and pull it straight out of its socket on the back of the logic board.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可