Canon PowerShot SD870 IS Motherboard Replacement

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南。

英语

中文

下一步

正翻译步骤 1

步骤 1

With the case, LCD screen, and release button housing removed, the logic board can be accessed and removed for replacement or repair.
Begin by using the Philips #00 screwdriver to remove two silver 0.080in screws on the left side of the metal housing plate (yellow circles).
Use the Philips #00 screwdriver to remove nine silver screws from the back and top of the camera (red circles).
You will have to lift the Function button and its wiring up from the pins holding it in place to access some of the screws.