跳转到主内容

修复你的物品

维修的权力

商店

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的6本指南

英语
中文

正翻译步骤 10

步骤 10
Temporarily leave your plastic card underneath the two rightmost battery cells to prevent them from re-adhering to the upper case. If using an iOpener, reheat it and reapply it, this time to the left-most battery cells. Again, leave the iOpener in each position for about a minute, reheating in between, to heat each half of the left-most battery cells.
  • Temporarily leave your plastic card underneath the two rightmost battery cells to prevent them from re-adhering to the upper case.

  • If using an iOpener, reheat it and reapply it, this time to the left-most battery cells.

  • Again, leave the iOpener in each position for about a minute, reheating in between, to heat each half of the left-most battery cells.

暂时将您的塑料卡放在两个最右侧的电池单元的下面,以防止它们重新粘到上壳上。

如果使用iOpener,请重新加热并重新使用,这次是最左边的电池。

再次,将iOpener放在每个位置大约一分钟,再加热,以加热最左边的电池的每一半。

在开源创作共享许可协议下,你的投稿已被许可