修复你的物品

维修的权力

商店

注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的6本指南。

返回指南
英语
中文
上一步 下一步

正翻译步骤 6

步骤 6
If you don't have a liquid adhesive remover, you'll be using a hot iOpener to warm and soften a section of the adhesive securing the battery to the upper case, and then carefully prying at that point. Use the hot iOpener to cover half of the two right-most battery cells.

  • If you don't have a liquid adhesive remover, you'll be using a hot iOpener to warm and soften a section of the adhesive securing the battery to the upper case, and then carefully prying at that point.

  • Use the hot iOpener to cover half of the two right-most battery cells.

  • After about a minute, reheat the iOpener and move it to cover the other half of the right-most battery cells.

如果没有胶水去除剂，用热的iOpener来加热和软化将电池固定到上壳上的一部分粘合剂，然后再仔细撬动。

使用热的iOpener来覆盖最右边两个电池的一半。

大约一分钟后，重新加热iOpener并使其覆盖最右侧电池的另一半。

在开源创作共享许可协议下，你的投稿已被许可。