注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的3指南

英语
中文

正翻译步骤 2

步骤 2
The top plastic piece holding the release button should be held on only by a red-and-black wire connector to the logic board.
  • The top plastic piece holding the release button should be held on only by a red-and-black wire connector to the logic board.

  • Remove the connector from the logic board and detach the release button housing from the camera.

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可