跳转到主内容
英语
中文

正翻译步骤 10

步骤 10
Slip the clamps over the new hose.
  • Slip the clamps over the new hose.

  • Then install the new hose fully over both of the connections - one at the power steering pump reservoir and the other down at the steering box.

  • Tighten the clamps to finish the installation.

  • At this time you may want to consider using some de-greaser to clean up the driver's side motor mount and the engine cross-member as they will be covered in power steering fluid. The oil may lead to premature failure of that motor mount, in particular.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可