跳转到主内容

修复你的物品

维修的权力

商店

英语
中文

正翻译步骤 3

步骤 3
Insert the new joystick into the circuit board. Make sure it is properly seated and that all the contacts line up with the holes in the circuit board. Solder all the contacts to the board. Here is the board after the repair. All that is left is to clean off the old flux with some isopropyl alcohol.
  • Insert the new joystick into the circuit board. Make sure it is properly seated and that all the contacts line up with the holes in the circuit board.

  • Solder all the contacts to the board.

  • Here is the board after the repair. All that is left is to clean off the old flux with some isopropyl alcohol.

将新的操纵杆插入电路板。 确保它正确就位,并且所有触点都与电路板上的孔对齐。

将所有触点焊接到电路板上。

这是维修过后的电路板。 剩下的就是用一些异丙醇清除旧的焊剂。

在开源创作共享许可协议下,你的投稿已被许可