跳转到主内容

修复你的物品

维修的权力

商店

英语
德语

正翻译步骤 3

步骤 3
Insert the new joystick into the circuit board. Make sure it is properly seated and that all the contacts line up with the holes in the circuit board. Solder all the contacts to the board. Here is the board after the repair. All that is left is to clean off the old flux with some isopropyl alcohol.
  • Insert the new joystick into the circuit board. Make sure it is properly seated and that all the contacts line up with the holes in the circuit board.

  • Solder all the contacts to the board.

  • Here is the board after the repair. All that is left is to clean off the old flux with some isopropyl alcohol.

Setze den neuen Joystick in die Platine ein. Achte daruf, dass die Kontakte genau in die Löcher in der Platine passen.

Verlöte alle Kontakte auf der Platine.

Hier siehst du die Platine nach der Reparatur. Jetzt msst du nur noch das Flussmittel mit Isopropylalkohol entfernen.

在开源创作共享许可协议下,你的投稿已被许可