跳转到主内容
英语
中文

正翻译步骤 4

步骤 4
Remove these two thumbscrews if you have them. Then remove the PDS bracket by pulling straight up. You should now have access to the RAM and PRAM battery.
  • Remove these two thumbscrews if you have them. Then remove the PDS bracket by pulling straight up.

  • You should now have access to the RAM and PRAM battery.

  • To remove the hard disk, remove the SCSI cable, Power Cable, and pull on the outermost tab on the drive bracket. Lift the drive beyond this tab. Then do the other tab and the drive should come out.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可