跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的2指南

英语
中文

正翻译步骤 29

步骤 29
Insert the tip of a spudger under the connector end of the microphone ribbon cable and lift to peel that section up from the upper case. Insert the tip of a spudger under the connector end of the microphone ribbon cable and lift to peel that section up from the upper case. Insert the tip of a spudger under the connector end of the microphone ribbon cable and lift to peel that section up from the upper case.
  • Insert the tip of a spudger under the connector end of the microphone ribbon cable and lift to peel that section up from the upper case.

把撬棒的尖头插到麦克风排线的接头处以下,把这块区域向上挑离上部机身(C壳)。

在开源创作共享许可协议下,你的投稿已被许可