跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的2指南

英语
中文

正翻译步骤 25

步骤 25
Open the MacBook Pro a little wider than 90 degrees, and place it on end, as shown. While holding the display and upper case together with your left hand, remove the remaining T8 Torx screw from the lower display bracket.
  • Open the MacBook Pro a little wider than 90 degrees, and place it on end, as shown.

  • While holding the display and upper case together with your left hand, remove the remaining T8 Torx screw from the lower display bracket.

  • Be sure to hold the display and upper case together with your left hand. Failure to do so may cause the freed display/upper case to fall, potentially damaging each component.

  • Remove the last remaining T8 Torx screw securing the display to the upper case.

以一个略大于90度的角度打开Macbook Pro,侧面朝下放着它,如图。

用你的左手把显示器和上部机身(C壳)握在一起,从下侧的显示器和也上拆掉剩下的T8内梅花头螺丝。

确保用你的左手将显示器和上部机身(C壳)握在一起。如果你没握紧,松动的显示器/上部机身(C壳)可能会掉落,有可能对每个元件造成损伤。

拆掉最后一个把显示器固定在上部机身(C壳)上的T8内梅花头螺丝。

在开源创作共享许可协议下,你的投稿已被许可