跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的6本指南

英语
中文

正翻译步骤 5

步骤 5
Apply a few drops of adhesive remover evenly under the edge of the rightmost battery cell.
  • Apply a few drops of adhesive remover evenly under the edge of the rightmost battery cell.

  • You don't need to use very much. The small bottle contains more than twice the amount of solvent needed to remove all the battery cells.

  • Wait 2-3 minutes for the liquid adhesive remover to penetrate underneath the battery cell before you proceed to the next step.

  • Use more adhesive remover if needed, but do not apply more than a few drops at a time. Using too much can allow the adhesive remover to make its way to the backside of your keyboard and potentially damage it.

在最右边的电池单元的边缘均匀涂抹数滴去除剂。

你不必用太多去除剂。瓶内的去除剂含量是移除所有电池所需用量的2倍以上。

等2-3分钟过后,胶水去除剂渗入到电池单元下方,再进行下一步骤。

按需要增加去除剂用量,但一次不要涂抹多于几滴的去除剂。使用过多的去除剂可能会使其渗透到键盘背面,可能会损害键盘。

在开源创作共享许可协议下,你的投稿已被许可