跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的2指南

英语
中文

正翻译步骤 5

步骤 5
Remove the following screws securing the I/O board to the upper case:
  • Remove the following screws securing the I/O board to the upper case:

  • One 3.5 mm T8 Torx standoff screw

  • One 3.5 mm T5 Torx screw

拆除下列将I/O板固定在上部机身(C壳)上的螺丝:

1颗3.5mm T9 内梅花头扁平头螺丝

1颗3.5mm T5 内梅花头螺丝

[* black] Remove the following screws securing the I/O board to the upper case:
[* red] One 3.5 mm T9T8 Torx standoff screw
[* red] One 3.5 mm T9T8 Torx standoff screw
[* orange] One 3.5 mm T5 Torx screw

在开源创作共享许可协议下,你的投稿已被许可