跳转到主内容
英语
中文

正翻译步骤 8

步骤 8
Remove the visible screws holding down the LCD panel frame and the inverter and bluetooth circuit boards located below the LCD. The metal assembly will come out from the plastic backing. The LCD housing is attached to the plastic back panel on the 4 corners, including on the hinges. Remove these screws. Now would be a good time to protect your screen with bubble wrap or foam bordered by tape. Green X is for visibility and warning.
  • Remove the visible screws holding down the LCD panel frame and the inverter and bluetooth circuit boards located below the LCD. The metal assembly will come out from the plastic backing.

  • The LCD housing is attached to the plastic back panel on the 4 corners, including on the hinges. Remove these screws.

  • Now would be a good time to protect your screen with bubble wrap or foam bordered by tape. Green X is for visibility and warning.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可