跳转到主内容
英语
中文

正翻译步骤 2

步骤 2
Remove the foam from the top of the wire connector. Gently remove the plastic connector in the same way as the previous connector of the same type. Lift the connector from the side with the ribbon cable in it.
  • Remove the foam from the top of the wire connector.

  • Gently remove the plastic connector in the same way as the previous connector of the same type.

  • Lift the connector from the side with the ribbon cable in it.

  • Using the spudger, gently push from the right side.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可