修复你的物品 社区 商店

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的8指南。

返回指南
英语
中文

正翻译步骤 1

步骤 1
Use a plastic opening tool to free the clips on the top and each side of the back cover. The bottom is secured with some adhesive foam. You should be able to finally free the back cover using an opening pick. The "snaps" at the bottom edge are more like hinges, so release all others then swing the back cover off outward from the top, and these fasteners will release without breaking. It's best to avoid prying around the SIM card slot and volume controls, as the plastic in these areas is very thin and likely to break from prying.

  • Use a plastic opening tool to free the clips on the top and each side of the back cover.

  • The bottom is secured with some adhesive foam. You should be able to finally free the back cover using an opening pick. The "snaps" at the bottom edge are more like hinges, so release all others then swing the back cover off outward from the top, and these fasteners will release without breaking.

  • It's best to avoid prying around the SIM card slot and volume controls, as the plastic in these areas is very thin and likely to break from prying.

  • When you replace the cover, there is a snap about even with the flash window that must also be attached (one of three that secure the back cover to the midframe). Qi (wireless) charging may not work if this isn't secure. Apply gentle but firm pressure over the "S" in "Nexus" and slide your thumb up towards the top, and the snap will engage.

用塑料撬棒来解开后盖顶部与侧边的卡扣。

底部由海绵胶带固定于机身。完成前述步骤后，可使用三角撬片来最终取下后盖。

因 SIM 卡插槽处的塑料非常薄，容易在拆解时断裂，请避免在 SIM 卡插槽附近撬开后盖。

-[* black] Use a [product|IF145-000|plastic opening tool] to free the clips on the top and each side of the back cover.
-[* icon_note] The bottom is secured with some adhesive foam. You should be able to finally free the back cover using an [product|IF145-123|opening pick].
-[* icon_note] It's best to avoid prying around the SIM card slot, as the plastic here is very thin and likely to break from prying.
+[* black] Use a plastic opening tool to free the clips on the top and each side of the back cover.
+[* icon_note] The bottom is secured with some adhesive foam. You should be able to finally free the back cover using an opening pick. The "snaps" at the bottom edge are more like hinges, so release all others then swing the back cover off outward from the top, and these fasteners will release without breaking.
+[* icon_caution] It's best to avoid prying around the SIM card slot and volume controls, as the plastic in these areas is very thin and likely to break from prying.
+[* icon_reminder] When you ''replace'' the cover, there is a snap about even with the flash window that must also be attached (one of three that secure the back cover to the midframe). Qi (wireless) charging may not work if this isn't secure. Apply gentle but firm pressure over the "S" in "Nexus" and slide your thumb up towards the top, and the snap will engage.

在开源创作共享许可协议下，你的投稿已被许可。