跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的21本指南

英语
中文

正翻译步骤 6

步骤 6
Remove the following 10 screws from the bottom case:
  • Remove the following 10 screws from the bottom case:

  • Three 1.7 mm Phillips from the front edge of the battery compartment.

  • One 3.9 mm T8 Torx to the right of the memory card.

  • One 6.9 mm T8 Torx at the left edge of the memory compartment.

  • Three 12.4 mm fully threaded Phillips from the center of the row of screws along the back edge of the case.

  • Two 15.1 mm 2.5 mm threaded Phillips, one from either end of the row of screws along the back edge of the case.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可