跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的418指南

英语
中文

正翻译步骤 2

步骤 2
Heat the iOpener for thirty seconds.
  • Heat the iOpener for thirty seconds.

  • Throughout the repair procedure, as the iOpener cools, reheat it in the microwave for an additional thirty seconds at a time.

  • Be careful not to overheat the iOpener during the repair. Overheating may cause the iOpener to burst.

  • Never touch the iOpener if it appears swollen.

  • If the iOpener is still too hot in the middle to touch, continue using it while waiting for it to cool down some more before reheating. A properly heated iOpener should stay warm for up to 10 minutes.

加热iOpener三十秒

贯穿整个维修过程,如果iOpener 冷却了,在微波炉中每次重新加热额外的三十秒。

注意在维修过程中不要过度加热iOpener,过热可能会导致iOpener爆炸。

如果出现膨胀千万不要碰iOpener。

如果iOpener中间部分依然烫的没法碰,请等待冷却后再加热,一个加热好的iOpener 应该可以保持热度十分钟

在开源创作共享许可协议下,你的投稿已被许可