跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的427指南

英语
中文

正翻译步骤 4

步骤 4
If you don't have a microwave, follow this step to heat your iOpener in boiling water. Fill a pot or pan with enough water to fully submerge an iOpener.
Alternate iOpener heating method
  • If you don't have a microwave, follow this step to heat your iOpener in boiling water.

  • Fill a pot or pan with enough water to fully submerge an iOpener.

  • Heat the water to a boil. Turn off the heat.

  • Place an iOpener into the hot water for 2-3 minutes. Make sure the iOpener is fully submerged in the water.

  • Use tongs to extract the heated iOpener from the hot water.

  • Thoroughly dry the iOpener with a towel.

  • The iOpener will be very hot, so be careful to hold it only by the end tabs.

  • Your iOpener is ready for use! If you need to reheat the iOpener, heat the water to a boil, turn off the heat, and place the iOpener in the water for 2-3 minutes.

如果您没有微波炉,请按照此步骤在沸水中加热iOpener。

在锅或平底锅里装满足够的水来完全淹没iOpener。

把水加热到沸腾。关火。

将iOpener放入热水中2-3分钟。确保iOpener完全浸入水中。

用钳子从热水中提取加热的iOpener。

用毛巾彻底擦干iOpener。

iOpener会很热,所以要小心只按尾部选项卡按住它。

您的iOpener已准备好使用!如果您需要重新加热iOpener,请将水加热到沸点,关火,并将iOpener放入水中2-3分钟。

-[title] Alternate heating method
+[title] Alternate iOpener heating method
[* icon_note] If you don't have a microwave, follow this step to heat your iOpener in boiling water.
[* black] Fill a pot or pan with enough water to fully submerge an iOpener.
[* black] Heat the water to a boil. ***Turn off the heat.***
[* black] Place an iOpener into the hot water for 2-3 minutes. Make sure the iOpener is fully submerged in the water.
[* black] Use tongs to extract the heated iOpener from the hot water.
[* black] Thoroughly dry the iOpener with a towel.
[* icon_caution] The iOpener will be very hot, so be careful to hold it only by the end tabs.
[* black] Your iOpener is ready for use! If you need to reheat the iOpener, heat the water to a boil, turn off the heat, and place the iOpener in the water for 2-3 minutes.

在开源创作共享许可协议下,你的投稿已被许可