Skip to main content

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
西班牙语

正翻译步骤 10

Step 10
Apply a new layer of thermal paste to all three chips.
  • Apply a new layer of thermal paste to all three chips.

  • When replacing the logic board, make sure all cables are routed around and above - not under - it, and to connect the two cables that do go beneath before pushing the board into place.

  • When you place the logic board back in the computer, try not to move it around once the processor has come into contact with the newly-applied thermal paste.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可