注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南。
正翻译步骤 5
步骤 5

-
Remove the following 12 T8 Torx screws from the logic board:
-
Four 3.9 mm, three along the front edge of the logic board, and one just above the right fan connector.
-
Three 6.9 mm large-headed screws in the upper, left corner of the logic board.
-
Five 6.9 mm scattered on the right half of the logic board.