跳转到主内容
英语
中文

正翻译步骤 5

步骤 5
Flip the motherboard out of the camera body and toward the bottom of the device to expose its underside. Using a spudger, peel back the adhesive protecting the large ribbon cable on the underside of the motherboard.
  • Flip the motherboard out of the camera body and toward the bottom of the device to expose its underside.

  • Using a spudger, peel back the adhesive protecting the large ribbon cable on the underside of the motherboard.

  • Disconnect the ribbon cable by flipping its clasp up, away from the motherboard, and removing it from the plastic casing in the direction of the cable.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可